HomeNewsNewsCinema Room Lighting: What to Install and Why

Cinema Room Lighting: What to Install and Why

Luxury home cinema room with acoustic fabric walls LED lighting and premium seating installed by Flagship AV in Suffolk

Lighting is the part of a cinema room most people leave until last, and it shows. Get it wrong and you’ve got glare on the screen and a room that feels like a lounge with a big telly. Get it right and the whole room changes the moment you press play.

I design cinema rooms across Suffolk and East Anglia, and lighting is part of every one. Here’s what I fit, why it works, and how it all comes together.

Cinema room installation by Flagship AV in Bury St Edmunds

The Golden Rule of Cinema Room Lighting

Any light that lands on the screen washes out the picture, especially with a projector. So every fitting in a cinema room is placed to throw light down or along the walls, never towards the screen. Dark, matt finishes around the screen help too, because pale walls bounce light straight back onto it.

LED Strip Lighting

LED strip is the workhorse of cinema room lighting. I fit it in ceiling coves, under step risers, behind acoustic panels and along the back of the seating.

It gives a soft, indirect glow that can stay on at a low level during a film without spoiling the picture. Step lights also mean nobody trips over a footstool on the way to the kitchen.

My tip: go for warm white as your everyday setting. If you like the idea of changing the mood, choose RGB strip, but make sure it dims right down to a whisper.

Star Ceilings

A fibre optic star ceiling is the showpiece. Hundreds of tiny points of light are set into the ceiling, and some systems can gently twinkle. The light source sits tucked away out of the room, so the ceiling itself stays cool and the source is easy to get at if it ever needs servicing.

It works in small rooms too. A star ceiling can make a box room feel far bigger than it is.

Wall Lights and Downlights

Wall lights add warmth and atmosphere before the film starts. Downlights are there for when you need proper light, such as cleaning, setting up or finding the remote that’s slipped down the sofa.

Both should be dimmable, and I avoid putting downlights near the screen wall. Deep set, low glare fittings stop bright spots catching your eye mid film.

One Touch Cinema Room Lighting Scenes

This is where it all comes together. With a lighting control system such as Rako, or with URC Total Control running the whole room, one button sets everything at once:

  • Welcome: a warm, comfortable level as everyone settles in
  • Film: everything fades down to just the step lights
  • Pause: lights come up gently so you can grab a drink
  • End: back up to full once the credits roll

As an authorised URC Total Control integrator, I can also link the lighting to the rest of the system, so pressing play on the film dims the room automatically. Rako is a great choice for existing homes because its wireless dimming means less disruption to walls and ceilings.

Who Does What

I design the lighting as part of the cinema room and set up all the control and scenes myself. All the electrical work is carried out by a qualified electrician I partner with, so every circuit is safe and signed off properly. You get one point of contact, and every job is done by someone qualified to do it.

Bringing It Together

Good cinema lighting isn’t about how many fittings you have. It’s about the right light in the right place, all working together at the touch of a button.

If you’re planning a room, see how I approach home cinema installation, read my guide to small cinema room ideas, or find out more about smart home lighting control. Every project starts with a free site survey.

Cinema Room Lighting FAQs

Mark

About the Author:

Mark

Mark Ryman founded Flagship AV after more than 30 years in the AV trade. He's a CEDIA member and personally designs and installs every cinema room, smart home and security system the business takes on, across Suffolk and East Anglia.

View All Posts by Mark